Self Vitalize
20L Atmospheric Water Generator,No Need to Connect the Pipe, Producing 20L(5.3Gallons) of Hot & Cold Pure Water per Day, the Ideal AWG for Off-Grid Living
20L Atmospheric Water Generator,No Need to Connect the Pipe, Producing 20L(5.3Gallons) of Hot & Cold Pure Water per Day, the Ideal AWG for Off-Grid Living
Couldn't load pickup availability
- The estimated 24 hours water production of A20L depends on the relative humidity and ambient temperature. A20L can produce up to 20 liters of pure water from the air based on 30°C(86℉) and RH 80%.
- The A20L does not need to be installed, just plug it in and follow the instructions in this manual. Can be used in home kitchen areas, offices, hotels, etc.
- A20L uses an eight-stage filtration process to produce clean drinking water from the air.Filtration Steps: Air Filter + Sediment Filter + Pre-Carbon Filter +Ultra-Fine Membrane Filter + Mineralization Filter +Nano Ceram-PAC Filter + LED-UV.
- Power Supply: AC 110V 60Hz(American) / AC 220V 50Hz(European).
- The operating environment condition range for A20L is RH from 30% to 99% and temperature from 15°C to 45°C(59℉ to 113℉).
- Please note: Please let the atmospheric water generator sit for 24 hours upon receipt before using it.
In general, the higher relative humidity and ambient temperature, the higher amount of water will be produced by Lekocyco A20L atmospheric water generator.The estimated 24 hours water production of A20L depends on the relative humidity and ambient temperature. A20L can produce up to 20 liters of pure water from the air based on 30C and RH 80%. The operating environment condition range for A20L is RH from 30% to 99% and temperature from 15C to 45C. By considering optimal, cost-effective and safe use, A20L must comply with the following conditions: 1) A20L must be positioned at least 30 cm from any walls or other structures from all sides, such as by placing in the middle of the long wall for optimum air circulation in the space. 2) It is still necessary to supply fresh moist air, choose the location wisely, such as lobby, corridors, halls, auditoriums, covered terraces and roofs, kitchen, the dining room and forced air change, or high concentrations of relative humidity, such as gyms, winter gardens etc. Otherwise it may cause dry air in the room and improper machine operation. 3) A20L must not be installed next to radiators or heaters.
Share
